dmesg - AMD Mobility Radeon HD 3200
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.10-0.bpo.2-686-pae (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.10.5-1~bpo70+1 (2013-08-11)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000afb8efff] usable
BIOS-e820: [mem 0x00000000afb8f000-0x00000000afc3bfff] ACPI NVS
BIOS-e820: [mem 0x00000000afc3c000-0x00000000afd6ffff] usable
BIOS-e820: [mem 0x00000000afd70000-0x00000000afdbefff] reserved
BIOS-e820: [mem 0x00000000afdbf000-0x00000000afe57fff] usable
BIOS-e820: [mem 0x00000000afe58000-0x00000000afebefff] ACPI NVS
BIOS-e820: [mem 0x00000000afebf000-0x00000000afeedfff] usable
BIOS-e820: [mem 0x00000000afeee000-0x00000000afefefff] ACPI data
BIOS-e820: [mem 0x00000000afeff000-0x00000000afefffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Hewlett-Packard HP Pavilion tx2500 Notebook PC/30F1, BIOS F.09 10/23/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-FFFFF uncachable
MTRR variable ranges enabled:
0 base 00FFF00000 mask FFFFF00000 write-protect
1 base 0000000000 mask FF80000000 write-back
2 base 0080000000 mask FFE0000000 write-back
3 base 00A0000000 mask FFF0000000 write-back
4 base 0100000000 mask FFC0000000 write-back
5 disabled
6 disabled
7 disabled
TOM2: 0000000140000000 aka 5120M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped: [mem 0x00000000-0x019fffff]
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37600000-0x377fffff]
[mem 0x37600000-0x377fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x375fffff]
[mem 0x34000000-0x375fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37800000-0x379fdfff]
[mem 0x37800000-0x379fdfff] page 4k
BRK [0x0159c000, 0x0159cfff] PGTABLE
BRK [0x0159d000, 0x0159efff] PGTABLE
RAMDISK: [mem 0x7ef07000-0x7fffefff]
Allocated new RAMDISK: [mem 0x36906000-0x379fd0ca]
Move RAMDISK from [mem 0x7ef07000-0x7fffe0ca] to [mem 0x36906000-0x379fd0ca]
ACPI: RSDP 000fe020 00024 (v02 HP )
ACPI: XSDT afefe120 0005C (v01 HPQOEM SLIC-MPC 00000003 01000013)
ACPI: FACP afefd000 000F4 (v04 HP 30F1 00000003 MSFT 0100000D)
ACPI: DSDT afef1000 08F83 (v01 HP 30F1 F0000000 INTL 20051117)
ACPI: FACS afe61000 00040
ACPI: HPET afefc000 00038 (v01 HP 30F1 00000001 MSFT 000F4240)
ACPI: APIC afefb000 00084 (v02 HP 30F1 00000001 TFSM 000F4240)
ACPI: MCFG afefa000 0003C (v01 HP 30F1 00000001 TFSM 000F4240)
ACPI: BOOT afef0000 00028 (v01 HP 30F1 00000001 ? 00000001)
ACPI: SLIC afeef000 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
ACPI: SSDT afeee000 00386 (v01 AMD PowerNow 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
4230MB HIGHMEM available.
889MB LOWMEM available.
mapped low ram: 0 - 379fe000
low ram: 0 - 379fe000
BRK [0x0159f000, 0x0159ffff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x379fdfff]
HighMem [mem 0x379fe000-0x3fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xafb8efff]
node 0: [mem 0xafc3c000-0xafd6ffff]
node 0: [mem 0xafdbf000-0xafe57fff]
node 0: [mem 0xafebf000-0xafeedfff]
node 0: [mem 0xafeff000-0xafefffff]
node 0: [mem 0x00000000-0x3fffffff]
On node 0 totalpages: 982314
free_area_init_node: node 0, pgdat c1483180, node_mem_map f4106020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3998 pages, LIFO batch:0
Normal zone: 1748 pages used for memmap
Normal zone: 223742 pages, LIFO batch:31
HighMem zone: 8461 pages used for memmap
HighMem zone: 754574 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1002a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
e820: [mem 0xaff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f40bc000 s34560 r0 d22784 u57344
pcpu-alloc: s34560 r0 d22784 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 980534
Kernel command line: initrd=/live/initrd2.img boot=live config nottyautologin hostname=SLOT-LiveCD locale=pl_PL.UTF-8 BOOT_IMAGE=/live/vmlinuz2
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (000379fe:00140000)
Memory: 3864000k/5242880k available (3085k kernel code, 65256k reserved, 1572k data, 460k init, 3018296k highmem)
virtual kernel memory layout:
fixmap : 0xffd34000 - 0xfffff000 (2860 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xc148d000 - 0xc1500000 ( 460 kB)
.data : 0xc130357c - 0xc148c800 (1572 kB)
.text : 0xc1000000 - 0xc130357c (3085 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:712 16
CPU 0 irqstacks, hard=f3806000 soft=f3808000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2200.036 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.07 BogoMIPS (lpj=8800144)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives: 12k freed
ACPI: Core revision 20130328
ACPI: All ACPI Tables successfully acquired
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Turion(tm) X2 Ultra Dual-Core Mobile ZM-82 (fam: 11, model: 03, stepping: 01)
APIC calibration not consistent with PM-Timer: 371ms instead of 100ms
APIC delta adjusted to PM-Timer: 1250041 (4638496)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU 1 irqstacks, hard=f38d2000 soft=f38d4000
Initializing CPU#1
smpboot: Booting Node 0, Processors #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 214623436 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
Brought up 2 CPUs
smpboot: Total of 2 processors activated (8800.14 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xafb8f000-0xafc3bfff] (708608 bytes)
PM: Registering ACPI NVS region [mem 0xafe58000-0xafebefff] (421888 bytes)
regulator-dummy: no parameters
NET: Registered protocol family 16
TOM: 00000000c0000000 aka 3072M
Fam 10h mmconf [mem 0xe0000000-0xe0ffffff]
TOM2: 0000000140000000 aka 5120M
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff])
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xe4000000-0xffffffff]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [1022:9606] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0x6038-0x603f]
pci 0000:00:11.0: reg 14: [io 0x604c-0x604f]
pci 0000:00:11.0: reg 18: [io 0x6030-0x6037]
pci 0000:00:11.0: reg 1c: [io 0x6048-0x604b]
pci 0000:00:11.0: reg 20: [io 0x6010-0x601f]
pci 0000:00:11.0: reg 24: [mem 0xd2409000-0xd24093ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xd2408000-0xd2408fff]
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 10: [mem 0xd2407000-0xd2407fff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xd2409500-0xd24095ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xd2406000-0xd2406fff]
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 10: [mem 0xd2405000-0xd2405fff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xd2409400-0xd24094ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x010180
pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 20: [io 0x6000-0x600f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xd2400000-0xd2403fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xd2404000-0xd2404fff]
pci 0000:00:18.0: [1022:1300] type 00 class 0x060000
pci 0000:00:18.1: [1022:1301] type 00 class 0x060000
pci 0000:00:18.2: [1022:1302] type 00 class 0x060000
pci 0000:00:18.3: [1022:1303] type 00 class 0x060000
pci 0000:00:18.4: [1022:1304] type 00 class 0x060000
pci 0000:01:05.0: [1002:9612] type 00 class 0x030000
pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:01:05.0: reg 14: [io 0x5000-0x50ff]
pci 0000:01:05.0: reg 18: [mem 0xd2300000-0xd230ffff]
pci 0000:01:05.0: reg 24: [mem 0xd2200000-0xd22fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xd2200000-0xd23fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:04.0: PCI bridge to [bus 02-07]
pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
pci 0000:00:04.0: bridge window [mem 0xd1200000-0xd21fffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:08:00.0: [14e4:432b] type 00 class 0x028000
pci 0000:08:00.0: reg 10: [mem 0xd1100000-0xd1103fff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:00:05.0: PCI bridge to [bus 08]
pci 0000:00:05.0: bridge window [mem 0xd1100000-0xd11fffff]
pci 0000:09:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:09:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:09:00.0: reg 18: [mem 0xd1010000-0xd1010fff 64bit pref]
pci 0000:09:00.0: reg 20: [mem 0xd1000000-0xd100ffff 64bit pref]
pci 0000:09:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PCI bridge to [bus 09]
pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:06.0: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 80-8f] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe4000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
acpi PNP0A08:00: ACPI _OSC control (0x19) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 1F
acpi root: \_SB_.PCI0 notify handler is installed
Found 1 acpi root devices
ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xafb8f000-0xafffffff]
e820: reserve RAM buffer [mem 0xafd70000-0xafffffff]
e820: reserve RAM buffer [mem 0xafe58000-0xafffffff]
e820: reserve RAM buffer [mem 0xafeee000-0xafffffff]
e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:07: Plug and Play ACPI device, IDs SYN014c SYN0100 SYN0002 PNP0f13 (active)
system 00:08: [io 0x0400-0x04cf] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x04d6] has been reserved
system 00:08: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0x077a] has been reserved
system 00:08: [io 0x0c00-0x0c01] has been reserved
system 00:08: [io 0x0c14] has been reserved
system 00:08: [io 0x0c50-0x0c52] has been reserved
system 00:08: [io 0x0c6c] has been reserved
system 00:08: [io 0x0c6f] has been reserved
system 00:08: [io 0x0cd0-0x0cdb] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0a: Plug and Play ACPI device, IDs ENE0100 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:09:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:06.0: BAR 14: assigned [mem 0xd2500000-0xd25fffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:01.0: bridge window [mem 0xd2200000-0xd23fffff]
pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02-07]
pci 0000:00:04.0: bridge window [io 0x3000-0x4fff]
pci 0000:00:04.0: bridge window [mem 0xd1200000-0xd21fffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 08]
pci 0000:00:05.0: bridge window [mem 0xd1100000-0xd11fffff]
pci 0000:09:00.0: BAR 6: assigned [mem 0xd1020000-0xd102ffff pref]
pci 0000:00:06.0: PCI bridge to [bus 09]
pci 0000:00:06.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:06.0: bridge window [mem 0xd2500000-0xd25fffff]
pci 0000:00:06.0: bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 80-8f]
pci 0000:00:14.4: bridge window [io 0x1000-0x1fff]
pci 0000:00:01.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:00: resource 19 [mem 0xe4000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xd2200000-0xd23fffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xd1200000-0xd21fffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xd1100000-0xd11fffff]
pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:09: resource 1 [mem 0xd2500000-0xd25fffff]
pci_bus 0000:09: resource 2 [mem 0xd1000000-0xd10fffff 64bit pref]
pci_bus 0000:80: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:80: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:80: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:80: resource 10 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:80: resource 11 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:80: resource 12 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:80: resource 13 [mem 0x000dc000-0x000dffff]
pci_bus 0000:80: resource 14 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:80: resource 15 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:80: resource 16 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:80: resource 17 [mem 0x000ec000-0x000effff]
pci_bus 0000:80: resource 18 [mem 0xc0000000-0xdfffffff]
pci_bus 0000:80: resource 19 [mem 0xe4000000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17376k freed
Simple Boot Flag value 0x79 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1384625773.380:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1685
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
pcieport 0000:00:06.0: irq 42 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:04.0:pcie04: HPC vendor_id 1022 device_id 9604 ss_vid 103c ss_did 30f1
pciehp 0000:00:04.0:pcie04: pci_hp_register failed with error -16
pciehp 0000:00:04.0:pcie04: Slot already registered by another hotplug driver
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2013-11-16 18:16:15 UTC (1384625775)
Freeing unused kernel memory: 460k freed
Write protecting the kernel text: 3088k
Write protecting the kernel read-only data: 1240k
NX-protecting the kernel data: 3056k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
udevd[57]: starting version 175
SCSI subsystem initialized
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: setting latency timer to 64
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xd2409500
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: bus type ATA registered
r8169 0000:09:00.0: irq 43 for MSI/MSI-X
r8169 0000:09:00.0 eth0: RTL8168c/8111c at 0xf823a000, 00:26:9e:84:47:94, XID 1c4000c0 IRQ 43
r8169 0000:09:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10-0.bpo.2-686-pae ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: setting latency timer to 64
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xd2409400
libata version 3.00 loaded.
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.10-0.bpo.2-686-pae ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd 0000:00:12.0: setting latency timer to 64
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2408000
ssb: Found chip with id 0x4322, rev 0x01 and package 0x0A
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 0x4243)
ssb: Core 5 found: UNKNOWN (cc 0x8FF, rev 0x00, vendor 0x4243)
ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, vendor 0x4243)
[Firmware Bug]: Invalid critical threshold (0)
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (68 C)
microcode: CPU0: patch_level=0x02000032
platform microcode: firmware: agent loaded amd-ucode/microcode_amd.bin into memory
microcode: CPU1: patch_level=0x02000032
microcode: Microcode Update Driver: v2.00 , Peter Oruba
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 3.10-0.bpo.2-686-pae ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio ccc
ata1: port disabled--ignoring
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409100 irq 22
ata4: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409180 irq 22
ata5: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409200 irq 22
ata6: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409280 irq 22
ata7: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409300 irq 22
ata8: SATA max UDMA/133 abar m1024@0xd2409000 port 0xd2409380 irq 22
ohci_hcd 0000:00:12.1: setting latency timer to 64
ohci_hcd 0000:00:12.1: OHCI Host Controller
ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2407000
ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.10-0.bpo.2-686-pae ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.0: setting latency timer to 64
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2406000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.10-0.bpo.2-686-pae ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci_hcd 0000:00:13.1: setting latency timer to 64
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2405000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.10-0.bpo.2-686-pae ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:00:14.5: setting latency timer to 64
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:14.5: irq 18, io mem 0xd2404000
usb 1-4: new high-speed USB device number 2 using ehci-pci
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 3.10-0.bpo.2-686-pae ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ata6: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata3: softreset failed (device not ready)
ata3: applying PMP SRST workaround and retrying
ata4: softreset failed (device not ready)
ata4: applying PMP SRST workaround and retrying
usb 1-4: New USB device found, idVendor=0bda, idProduct=0158
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: USB2.0-CRW
usb 1-4: Manufacturer: Generic
usb 1-4: SerialNumber: 20071114173400000
usbcore: registered new interface driver usb-storage
ums-realtek 1-4:1.0: USB Mass Storage device detected
scsi8 : usb-storage 1-4:1.0
usbcore: registered new interface driver ums-realtek
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-8: FUJITSU MJA2320BH G2, 8919, max UDMA/100
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA FUJITSU MJA2320B 8919 PQ: 0 ANSI: 5
ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T30L, GC04, max UDMA/100
ata4.00: configured for UDMA/100
scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T30L GC04 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sr0: scsi3-mmc drive: 31x/31x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-2: new high-speed USB device number 2 using ehci-pci
usb 2-2: New USB device found, idVendor=04f2, idProduct=b09b
usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-2: Product: CNF7060
usb 2-2: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-2: SerialNumber: SN0001
usb 6-1: new full-speed USB device number 2 using ohci_hcd
usb 6-1: New USB device found, idVendor=03f0, idProduct=171d
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: HP Integrated Module
usb 6-1: Manufacturer: Broadcom Corp
scsi 8:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg2 type 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
usb 7-1: new full-speed USB device number 2 using ohci_hcd
usb 7-1: New USB device found, idVendor=08ff, idProduct=1600
usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 7-1: Product: Fingerprint Sensor
usb 7-2: new full-speed USB device number 3 using ohci_hcd
usb 7-2: New USB device found, idVendor=056a, idProduct=0093
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: ISD-V4
usb 7-2: Manufacturer: Tablet
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
aufs: module is from the staging directory, the quality is unknown, you have been warned.
aufs 3.10-20130805
loop: module loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
udevd[775]: starting version 175
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
ACPI: AC Adapter [ACAD] (on-line)
acpi device:04: registered as cooling_device2
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
ACPI: Battery Slot [BAT0] (battery present)
kvm: Nested Virtualization enabled
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
wmi: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input6
acpi-cpufreq: overriding BIOS provided _PSD data
ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
ene_ir: PLL freq = 1406
ene_ir: KB3926C detected
ene_ir: Firmware regs: 00 01
ene_ir: Hardware features:
ene_ir: * Uses GPIO 40 for IR demodulated input
input: Wacom ISDv4 93 Pen as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.0/input/input7
input: Wacom ISDv4 93 Finger as /devices/pci0000:00/0000:00:14.5/usb7/7-2/7-2:1.1/input/input8
usbcore: registered new interface driver wacom
input: HP WMI hotkeys as /devices/virtual/input/input9
media: Linux media interface: v0.10
psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04711/0xa00000/0x0, board id: 3655, fw id: 436772
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3a
sp5100_tco: failed to find MMIO address, giving up.
Registered IR keymap rc-rc6-mce
input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input11
rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
ene_ir: driver has been successfully loaded
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR NEC protocol handler initialized
IR JVC protocol handler initialized
Linux video capture interface: v2.00
[drm] Initialized drm 1.1.0 20060810
IR SANYO protocol handler initialized
IR Sony protocol handler initialized
input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input12
IR MCE Keyboard/mouse protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 249
usbcore: registered new interface driver btusb
rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
IR LIRC bridge handler initialized
uvcvideo: Found UVC 1.00 device CNF7060 (04f2:b09b)
input: CNF7060 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input13
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
cfg80211: Calling CRDA to update world regulatory domain
snd_hda_intel 0000:00:14.2: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input14
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS780 0x1002:0x9612 0x103C:0x30F1).
[drm] register mmio base: 0xD2300000
[drm] register mmio size: 65536
ATOM BIOS: HP_Soyuz20
radeon 0000:01:05.0: VRAM: 320M 0x00000000C0000000 - 0x00000000D3FFFFFF (320M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=320M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 431776 kiB
[TTM] Zone highmem: Available graphics memory: 1940924 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 320M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
platform radeon_cp.0: firmware: agent loaded radeon/RS780_pfp.bin into memory
platform radeon_cp.0: firmware: agent loaded radeon/RS780_me.bin into memory
platform radeon_cp.0: firmware: agent loaded radeon/R600_rlc.bin into memory
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffa04c00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffa04c0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
radeon 0000:01:05.0: setting latency timer to 64
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] LVDS-1
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] LCD1: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
[drm] fb mappable at 0xC0142000
[drm] vram apper at 0xC0000000
[drm] size 4096000
[drm] fb depth is 24
[drm] pitch is 5120
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x50
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.33.0 20080528 for 0000:01:05.0 on minor 0
b43-phy0: Broadcom 4322 WLAN found (core revision 16)
b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 4
Broadcom 43xx driver loaded [ Features: PMNLS ]
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
b43 ssb0:0: firmware: agent aborted loading b43/ucode16_mimo.fw (not found?)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
b43 ssb0:0: firmware: agent aborted loading b43/ucode16_mimo.fw (not found?)
b43 ssb0:0: firmware: agent aborted loading b43-open/ucode16_mimo.fw (not found?)
b43 ssb0:0: firmware: agent aborted loading b43-open/ucode16_mimo.fw (not found?)
b43-phy0 ERROR: You must go to and download the correct firmware for this driver version. Please carefully read all instructions on this website.
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
r8169 0000:09:00.0 eth0: link down
r8169 0000:09:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:09:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
fuse init (API version 7.22)
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
aufs may_rename_srcdir:446:URL Classifier[3611]: renaming dir who has child(ren) on multiple branches, is not supported
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
usb 1-1: new high-speed USB device number 3 using ehci-pci
usb 1-1: New USB device found, idVendor=0951, idProduct=1689
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: DataTraveler SE9
usb 1-1: Manufacturer: Kingston
usb 1-1: SerialNumber: 0019E06B078CBD2047000083
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi9 : usb-storage 1-1:1.0
scsi 9:0:0:0: Direct-Access Kingston DataTraveler SE9 PMAP PQ: 0 ANSI: 4
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:0: [sdc] 30704064 512-byte logical blocks: (15.7 GB/14.6 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 23 00 00 00
sd 9:0:0:0: [sdc] No Caching mode page present
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sd 9:0:0:0: [sdc] No Caching mode page present
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 9:0:0:0: [sdc] No Caching mode page present
sd 9:0:0:0: [sdc] Assuming drive cache: write through
sd 9:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
usb 1-1: USB disconnect, device number 3
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through
sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
sd 8:0:0:0: [sdb] Asking for cache data failed
sd 8:0:0:0: [sdb] Assuming drive cache: write through